You Will Forever Be My Always | Bee Arty

Hi Everyone, back with you today sharing my latest creation for Bee Arty blog using the beautiful range Forever My Always designed by Fiona Paltridge.

 

I gathered all my pieces together prior to starting.  My layout was a white cardstock base. 

Taking the Diamond metal die, cut out two in a rose gold foil cardstock. Cut a strip of navy cardstock approximately 1" in size. More navy cardstock is used to mount your photo,

I was lucky enough to have some lace already coloured to match the papers.  If you don't you can always colour some white lace with an ink that matches.  One colour in the Colour Blast range that will work beautifully is Bling.

On the Heart Beat patterned paper there is a fine black line that runs slightly to the right of the centre of the page.  Place the paper in your trim and cut along this line.

Take the smaller piece (the large piece is not required) and place it on the white cardstock to the left edge.  With a pencil make a couple of marks where the paper ends.  Use this as a guide as to where to do your stenciling.

Next, take the My Lady A4 stencil, place the floral part of the stencil, centred vertically, at the marks that you made where the patterned paper was ending. Apply Heavy White Gesso over the stencil.

Whilst the gesso is still very wet, sprinkle some of both the Steel and Just Blue Embossing powder over the gesso. Using your heat gun set the embossing powder.  If you like a textured look to the gesso, keep the heat on the gesso until it bubbles, but be careful not to hold the gun too close or you could scorch your cardstock.

Once you have set the gesso, attach the Heart Beat patterned paper to the left side of the white cardstock.  Attach your lace against the right edge of the patterned paper, then take the strip of navy cardstock and apply over the seam of the patterned paper and the lace.

Mount your photo on to some navy cardstock and then add 3D foam tape/dots to the reverse. My photo was printed with a border so if you like do a double mat.  

I added 3D foam tape/dots to the reverse of the photo prior to mounting on the navy cardstock. So there was two layers of 3D foam tape/dots. Add the photo to the layout.  For this layout I created the cluster whilst attached to the layout.

Add the two Diamond die cuts to the photo. Add a selection of fussy cut pieces from the Cut Apart sheet.  Mount some on 3D foam tape/dots to get depth to the layout.

The title used for the layout came from the Heart and Soul patterned paper, again mounted.

I finished the layout with a raw wood veneer. 

Below are a few closeups of my finished layout.

PRODUCTS USED

Forever My Always Collection

Heart Beat - patterned paper

Heart and Soul - patterned paper

Gentle Heart - cut apart sheet

Diamond - metal die

My Lady - A4 Stencil

Colour Blast Mixed Media

Steel - Embossing Powder

Just Blue - Embossing Powder

Heavy White Gesso

Other Products

Navy Cardstock

White Cardstock

Lace

Adhesives

Rose Gold Foil Cardstock

Thank you for stopping by.

Make sure you get some 'me' time in every week.

Take Care for Now,

Anita E

 

"STRONG" | Colour Blast

Hi Everyone

Now I love my Colour Blast products as much as you and with the large number of products in my collection I have been trying to use different colours on each of my posts.

Today I have used two of my all time favourite Colour Paste in Sienna and Leather. They are both extremely striking on the white background.  

So after using a fun filter from Snapchat I ended up with the perfect photo for my layout. It's nice to play around once in a while.

 After preparing my cardstock background with some Heavy White Gesso, using a baby wipe and two coordinating Colour Artist Inks in Rust and Cider I smooshed the Rust across the background and once dried added Cider.

I did this a couple of times to get the depth and colours that I wanted to tie in with the photo.

  

Next, using my metal spatula I stroked some of the Colour Paste

in Sienna and Leather down my page.  I wanted a very uneven look on the page.

Using the amazing Heavy White Gesso

I added more texture with a stencil ensuring some of the stencilling went over the Colour Paste. 

After selecting my chosen embellishments I decided I wanted to keep the vast majority of them white.  I found a heap of wood veneer flowers in my stash.  I 'attacked' them with my sponge and Heavy White Gesso trying to get a a bit of a stippled and roughish look to them.

I didn't quite the look I wanted, so I worked with a paint brush and the gesso and ended up happy with the final result.

  Using the Colour Shimmer Brush Marker in Clear I added a slight bling to the wood flowers.  It ended up ever so subtle but took the matte affect off them. I did up adding some copper glitter to two of the flowers that you can see in the close up photos below.

 

 I added by bling title, a couple of mulberry paper flowers and a few sticker phrases from Flutterby Designs and a cute sequin bow from D-lish Scraps and the layout was complete.

 

Thanks for stopping by.

Anita E

xx 

"Never Stop Dreaming" | Colour Blast

Welcome Back

For my share today I created a Dream Catcher canvas wall hanging.   I love having some of my creations hanging on my craftroom walls and since  need to use up my stash (to make room for more) I went for this canvas as my project base.

To start my project, using some plain white tissue paper and a really good gel medium I attached the tissue to the canvas base.

  

Once dry I did several coats of Heavy White Gesso to seal it and give it a great working surface.

I then chose an array of Colour Shimmer Sprays including Sunshine, Tangereen Dream, Apple of My Eye, Deep Water, Lovely Lilac and Envy and went crazy. As much as I liked the background there was too much colour and a little too much shimmer.  

To fix this I went back over the top of the colour with the Heavy White Gesso again so soften the background and I was happy with the end result. I forgot to take a second photo after the second coat.

 Next I got to add my favourite Colour Shimmer Dust in Lollipop and really hit with the water spray so that the colour got in to all the creases of the tissue paper.

I then worked on my embellishments.  I love the Celebr8 chipboard and adore the feather piece.  I firstly gave it a coating of Heavy White Gesso and then with a sponge and Colour Artist Ink in Slipper. I allowed each coating to dry but I just couldn't get the colour I wanted.... maybe I was too impatient to build it up.

So I quickened up the process and added some of the Colour Artist Ink in Slipper to some Heavy White Gesso and mixed it up in my pallet.  I made sure when I mixed it that it had a marbled effect so hopefully it would transfer like an ombre effect when it dried. 

I then mixed my Colour Artist Inks in Oasis and Mermaid together to make a more jade colour and then painted it on to some feather I made using a silicone mold.  They came up a great.

 Using the Colour Embossing Powder in Deep Water and Rose Petal and embossed a wood veneer wreath with a marbled effect. I then used the Deep Water Colour Embossing Powder again and heat embossed my title.

Using an array of Little Birdie Crafts flowers, a bit of bling and all the other embellishments that I altered using Colour Blast products I completed the canvas. 

Below are a full picture of my finish canvas and several closeups.

Thanks for stopping by. 

Until next time... happy crafting.

Anita E

xx

L'Aquarelle Notebook | Artdeco Creations

Hi Everyone

I am sharing with you an altered notebook using the soon to be available L'Aquarelle range from ULTIMATE CRAFTS.
I love this new range and there is such an array of lovely papers that warrant fussy cutting. 

So to start I deconstructed my notebook so that I could just work on my front and back covers.    I used the Couture Creations Anna Griffin Acrylic Gesso to seal both the inside and outside of the two covers. 

Once dry I sprayed it with some colour sprays that I made using the yellow and pinkish red powders from the Couture Creations Anna Griffin Pigment Powder Set.  I used my heat gun to hurry up the drying process because I was being impatient.
Using the Definitons stamp set from the L'Aquarelle range I inked up the stamp with black and stamped over the covers in a few places.
Next using one of the gorgeous Couture Creations Anna Griffin Stencils, Daisy Batik, and some embossing paste added some texture to the outside of the covers. Again I dried it off with my heat gun to hurry the drying process along.

The fussy cutting that I did came from the 6"x6" paper pad.  They match in the with the yellows and pinkie reds beautifully.  I stamped the fern stamp from the Flowers and Flourishes set on some Battle Fatigue green cardstock from Ultimate Crafts and fussy cut them.

I also added a couple of flowers (Camden Cottage rose deconstructed smaller and Tie Dyed and Jewelled flowers) which I added some ink to to soften the whiteness of them.  I also tied died a piece of seam binding with matching colours to add to the finish embellishing. Due to the mixed media products that I used all of the embellishing was adhered with hot glue to ensure that it stayed 'stuck'.

  
Products Used
ULT200039 - Ultimate Crafts Cardstock - Battle Fatigue
ULT157762 - L'Aquarelle Collection - 6x6" Paper Pad
ULT157798 - L'Aquarelle Collection - "Definitions" Stamp Set
ULT157796 - L'Aquarelle Collection - "Flowers & Flourishes" Stamp Set
CO724297 - Couture Creations Bulk Flowers - Camden Cottage Roses 6cm 
CO724293 - Couture Creations Bulk Flowers - Tie Dyed & Jewelled 3cm
CO724885 - Couture Creations Anna Griffin Mixed Media - 8"x8" Stencil Daisy Batik
CO724866 - Couture Creations Anna Griffin Mixed Media - Mix and Match Pigments
CO724871 - Couture Creations Anna Griffin Mixed Media - Acrylic Gesso
CO724870 - Couture Creations Anna Griffin Mixed Media - Embossing Paste


So thank you for stopping by and checking out my creation today.

If you are joining us at Creative Inspiration Live 2017 I will see you there.  Don't forget to come and say hi!!