Showing posts with label 3D Foam Tape. Show all posts
Showing posts with label 3D Foam Tape. Show all posts

17 May 2017

Chef Lilli | Artdeco Creations

Hi Eveyone,

Anita, back here with you today sharing another (yes another) creation using the RAMBLING ROSE collection.
Todays layout showcases a photo of my cute little niece Lilli at her birthday party this year.  They all went and did baking and she looks so cute in her chef's hat and apron.



After selecting the patterned paper that I wanted to use for the base mat of my layout I coated it lightly with some of the Anna Griffin Couture Creations Acrylic Gesso.  Allow it to dry.



Next I chose the largest frame that I could find and cut out both the outside and inside as below.  On the reverse of the frame I have added some foam mounting tape.
I then snipped the frame in half so that I could stretch it further to make it bigger.


After my patterned paper that I coated with Gesso had dried, I took a paper doily from my collection and in several places on the patterned paper inked over the doily in a matching ink.  I am keeping the doily with my others as I am sure I will be able to use it on a layout at another time.
The second photo below shows the subtle effect on the patterned paper.

 Using the beautiful Latticed Panel die from the Rambling Rose collection I die cut one panel in a matching soft pink cardstock.  I then snipped it down as I will be using it as a feature behind my photo.

Here is the finished look of the die behind the photo. You will see I added some Stunning Silver 3mm adhesive pearls along the edges.

 After fussy cutting several of the white butterflies from the patterned papers I then coloured them up.  I have recently become the owner of an amazing kit of CHAMELEON PENS and have only just started playing with them.  I took two of the large butterflies and using some of matching pink and purple colours blended colour over the butterflies. 

I then added some of the Liquid Drops 3D Pearls in Cottonball along the wings.  I am only just getting used to this product so my little pearls are all different sizes.  
I am sure with time I will get better at it :) 
Put these aside to dry.  I also coloured up several of the other sizes in differing shades of grey as well (closeups will show these).
 


Prior to adding the frame, I used the Script stamp from the collection and stamped several times on the patterned background and then again using the flowers from the Grateful stamp and die set. I used a darkish grey ink.
Next, I cut a strip of the woodgrain paper and trimmed to approximately 11" in length snipping each end into a banner shape. I adhered the frame down just slightly down off centre. Next I used the woodgrain strip to hide the cut in the frame when I layed it down on the page.  To do this I just attached it just in the centre and then added a paper doily over the top of it.

Next, as per below, I created a small 'bend' in the woodgrain paper, holding it in place with a small amount of doubled sided tape.

I coloured up one of the large Camden Beaded Cottage flowers with some pink and set it aside to dry.  I added some Crystalina Glitzin' Glamour to the centres of some of the Tie Dyed & Jewelled Florettes and set them all aside to dry.

I mounted my photo on to some 3D foam mounting tape and once attached to the centre of the frame commenced adding my flowers, leaves and butterflies to the layout until I liked the final product.  I continued using the 3mm pearls around the frame and on the butterflies.
My finishing touch was the pink resin bird.
Below is a closer view of the middle of the layout.

Below are some closeups of the finished layout.




Products Used
ULT157701 - Rambling Rose  - 12x12 Paper Pad
ULT157740 - Rambling Rose - Script Stamp
ULT157744 - Rambling Rose - Grateful Stamp and Die Set
ULT157727 - Rambling Rose - Latticed Panel die
ULT 157746 - Rambling Rose - Assorted Resin Set
ULT157702 - Rambling Rose - 6x6 Paper Pad
CO724871 - Couture Creations Anna Griffin - Acrylic Gesso
CO724634 - 3mm Adhesive Pearls - Stunning Silver
CO724290 - White Bulk Flowers - English Rose 1.5cm
CO724292 - White Bulk Flowers - Tie Dyed & Jewelled 2.5cm
CO724293 - White Bulk Flowers - Tie Dyed & Jewelled 3cm
CO724297 - White Bulk Flowers - Camden Rsoe 3cm
CO724298 - White Bulk Flowers - Camden Beaded Cottage Rose
ULT157649 - Liquid Drops 3D Pearls - Cottonball
CO721971 - Glitzin' Glamour - Crystalina 
CO721963 - 18mm Foam Mounting Tape
CO721985 - 6mm Double Sided tape


 Thank you for stopping by today.  Pop back tomorrow for more inspiration.

Happy Creating.
Anita
xx



7 March 2017

Spread you Wings and Fly | Artdeco Creations


Hello Everyone!
Anita here again today to share with you a layout I have created for goodies from the L'Aquarelle collection.


For this layout I decided to concentrate on some stamping and mixed media, building the textures.

So have you gotten hold of the Couture Creations Anna Griffin mixed media products yet.  I have to say I absolutely love the gesso to prepare my papers as it is so light and it dries so quickly which is what I need due to my impatience when creating.  I also love love love the embossing paste.  It is just like beautiful light and fluffy buttercream icing.  
Below you will see the Mixed Media products that I have used on the layout.


To start the layout I have taken some Snow White Ultimate Crafts Cardstock and coated it with a light coverage of the Acrylic Gesso.  If you like you can fasten the drying process with your heat gun but be gentle as too much heat will make the cardstock curl.

Next in a small spritz bottle with water add a good mix of the green and blue Pigment Powders to mix to a shade that you like.  You now have your own customised pearlised spritz.
Spray the page where you want coverage.  I had issues with my spray bottle so I assisted the blending with my fingers to get a better coverage.
Once the my spray was dry I then took my embossing paste and the Daisy Batik stencil and added some more texture to the cardstock. 
I next took some black spray and using the insert flicked some black ink lightly across the layout.

Below is how my pearlised spray and embossed stencil came up.

 Next I stamped up the single flower from the Flowers & Flourishes stamp set, and also two of the butterflies from the 'Spread your Wings' set. 
I poured out a little of the pearlised spritz on to a plate and soaked up the majority of the moisture.  The remainder on the plate I used and painted on to the flowers that I stamped.  Make sure you use an archival black ink so that the ink does not bleed when water touches it.

Enjoy fussy cutting the four flowers and two butterflies.  
I used a couple of other stamps from my personal collection to add a few 'lines' of stamping to my page, I then hot glued some lace down the length of the page. 

After mounting the photo on 3D foam tape, it is then just about laying the flowers and butterflies.  I added a few extra butterflies just stamped on the cardstock and because I loved the dragonflies so much added a couple of them as well from the Spread Your Wings stamp set.  I also used the sentiment from the same set as my page title.
To finish the page I coloured some of the snow white 3mm pearls with black permanent pen and once dry to touch placed some over the page. 
To finish I drew a thin line around the edge of the layout to frame it.

Below are a few closeups of the page.





Products Used

Thank you for stopping by today.  
Until next time...... happy crafting.


Anita



5 January 2017

L'Aquarelle Butterfly Card


Hi Guys,
HAPPY NEW YEAR,  
I am back again today to share with you my first creation using the L'Aquarelle range from Ultimate Crafts. This is a sneak peek for you all as this collection will be released at CHA January 19-23  

I needed to make a lovely birthday card and thought this range would be perfect.  The combination of the lovely watercolour papers matching with the gorgeous butterflies and birds makes it perfect for your cards and scrapbooking.
This range also has a beautiful 'card makers' range.


You're going to get excited about this new range.  It is so colourful and made for both
scrapbookers and cardmarkers.

To create my card I used Ultimate Crafts cardstock in Paper Bag and Leprechaun.  I used the Paper Bag for the card base and used the Leprechaun as the mat for the patterned paper.
 I love the patterned papers and chose to cut the corner portion of one of the 12x12 papers.
After making my Christmas cards I found I was short of glitter cardstock in gold so I decided to do the next best thing..... I used gold embossing powder, Couture Creations Embossing Powder in gold Super Sparkles and embossed the four edges of my patterned paper.
To do this I just used an off-cut of paper larger than my chosen patterned paper and held it at the width I like from the edge and dabbed my Versamark ink around the edge, and then heat embossed the gold powder.


Didn't it just come up a treat :).
It just gave the paper that little extra and didn't give it the extra weight of a double mat
behind the patterned paper.

Next, because I didn't yet have the beautiful colours of the seam binding from the new range, I took a piece of white seam binding I had and inked it up in matching purples and green ink. To blend the colours together and get a softened look I spritzed the ribbon with water and then dried it off with my heat gun.

Next using the gorgeous Watercolour Butterfly Decorattor Die, I heat embossed the solid cut with gold embossing powder and the intricut butterfly with both gold and a matching green embossing powder to get a mottle affect.


Once I had finished constructing the card I added a little bit of Glitzin Glamour in
Lilac to the flowers.




PRODUCTS USED
ULT157761 - L'Aquarelle - 12x12" paper stack
ULT157752 - L'Aquarelle - Watercolour Butterfly Decorator Die
ULT200036 - Ultimate Crafts Cardstock - Leprechaun
ULT200045 - Ultimate Crafts Cardstock - Paper Bag
CO724988 - Couture Creations Embossing Powder - Super Sparkles - Gold
CO7721975 - Couture Creations Glitzin Glamour - Lilac
CO724389 - Turbo Precision Glue pen
CO721984 - 12mm Double Sided Tape


Thanks for stopping by.

Anita 




29 December 2016

Magical Memories by Anita Enright


Hi Everyone,

And, just like that.... Christmas is now over for another year.  I hope everyone had a wonderful time with family and friends and you have taken some great photos to scrap in 2017.

For my post today I have created a layout using the Wild & Free collection from Couture Creations also using a couple of the gorgeous dies from the Ornamental Affair Collection.

I loved the below photo so I just had to use it in a layout. It was taken on my honeymoon from our trip to Kuranda in Northern Queensland.



I wanted to keep my layout very 'clean' and simple so that all focus was drawn in on to the photo and that gorgeous Galah who was ever so happy to sit on my hand.

I chose to keep the base cardstock white so I chose the Snow White cardstock from Couture Creations.  I teamed the white up with Verde (green) and Fairy Wings (pink) cardstock as well from Couture Creations.
I double matted my photo on the white and green cardstock and added some 3D foam mounting tape to the reverse. Next I selected three patterned paper from the Wild & Free paper collection and layered them on the white base cardstock.
I cut out one of each of the Otis and Juniper doily dies, one in white and one in green cardstock, and one of the Everly Background and two of the Clementine Border in the pink cardstock.
Next cut the Otis and Juniper doilies in half and attach to the back of your mounted photo, then adhered this over the layers of Wild & Free papers.

I chose a border strip from the Ephemera pack, cut it in half and attach it close to the bottom edge of the page, half on each side.  Looking through the sticker sheet available in the Wild & Free collection pack I found the perfect sticker that I could use for my title.  I mounted it on some of the green cardstock and snipped in the sides to look like a double ended banner. Mount this on some 3D foam mounting tape. Next I took one of the Clementine Border dies and cut two small pieces from it and attach to the reverse of the title and then added it to the centre of the emphemera strip that I earlier attached to the bottom of my cardstock base. The other Clementine Border I adhered along the right side of the patterned papers and tucked in the Everly Background die cut to the top right side of the patterned papers.

To finish I added a round sticker with the word 'untamed' on it and attached it slightly over the photo using 3D foam dots to the back to level it out.  I used one of the Cottage Pollen bulk flowers and lightly inked then edges in a matching pink ink and then spritzed it with water so that the ink softened.
This was a nice, quick and easy layout to complete and I am happy with the result.  It will be put in a frame and hung on the wall in my craft room.





Thanks for stopping by today.
With only a couple of days to go I hope you all have a wonderful start to 2017.
Party hard on New Years Eve but party safely.

Ciao for now.
Anita