Fabulous | Colour Blast by Bee Arty

Hi Everyone, back today sharing my latest blog post for Colour Blast by Bee Arty.

From the moment I first saw Forever My Always collection from the very talented Fiona Paltridge, I couldn't wait to get my hands on the range.

All Colour Blast products were from the Queen Bee kit.

So for the layout today and the my gorgeous photo I knew my background just had to a white base.

To start I cut my white cardstock down to 11"x11".
After applying a sealing coat of Heavy White Gesso to my cardstock I then apply gesso through the My Lady A4 stencil from the collection but only the flowers. Whilst the gesso was still wet I sprinkled the Sahara Sand Embossing Powder over the gesso and then dried it off with my heat gun.  I added some good heat in several spots to make it bubble.

Once I finished heat embossing the gesso and the cardstock was totally dry I mounted this on to the patterned paper that was the reverse side of the cover page of the paper pack.

Next I fussy cut all the pieces from the Gentle Heart page so I had everything ready to go to create my layering around my photo.  Using my Versamark pen I drew around the edges of a couple of the leaves and then heat embossed the Sahara Sand Embossing Powder  giving a nice glittery edge to the leaves.

 

I blinged up some of the natural cotton ribbon with the Bling Shimmer Spray that was part of the Queen Bee collection kit.

 

To create my cluster I sprayed some book paper with the Bling Shimmer Spray and quickly dried it off with my heat gun.  I die cut one of the Diamond Metal Die using the X & O patterned paper from the collection. I mounted my photo on some cardboard before added the book paper to the back along with the die cut, a paper doily and several of the fussy cuts flowers from the cut apart sheet.

After attaching it to my layout I then added some of the cotton ribbon to the top and bottom undersides of the photo.

Next I used the "Fabulous" chipboard sentiment from the kit and added the gorgeous Sahara Sand Embossing Powder to it, heat setting it. From my stash I die cut the My Flower Metal Die from the collection on some match gold cardstock.

I then finished it off with a couple of the small navy flowers, a little wood veneer sentiment, a flair button, a few little matching adhesive gemstones, and a Charms Creations heart embellishment that I had lightly sprayed with the Bling Shimmer Spray along with a few Bling droplets over the white cardstock.

Check out are a couple of closeups of my layout.

Thanks again for stopping by.

Don't forget to share your creations on the Bee Arty Creative Hive Facebook page we love to see what you create as well.

Ciao for now,
Anita E

Free Spirit | Colour Blast

Hi Everyone, Anita here with you today.  

I love using bright happy summery colours and when seeing this photo of Sabine, needed to bring out the colour of the juice she was drinking.  I am using a wide array of products from differing collections on this layout.

After prepping my cardstock with some of the Heavy White Gesso I chose the 'Encircled' stencil from the Arty Farty collection and added stenciling over the page.

The below photo shows just how beautiful this stencil really is.

Next I took a paper doily and using my watercolour palette, coloured the doily in the "Sunshine" colour.

Using the "Amber" Shimmer Dust and a little water I coloured up a Charms Creations heart with a paintbrush.

Taking my dry coloured paper doily I sprinkled some of the same "Amber" Shimmer Dust over the doily and sprayed it with water.  Dry this off with a heat gun. 

So, I don't know about you but I love the Colour Artist Inks. For my layout I used "Cider" which I added first.  I lightly sprayed the stenciling with water and then added a few drops of the Artist Ink.  I lifted the page to move the ink around.  Dry off with your heat gun.

My next layer of Colour Artist Ink I added was "Citrus".  Dry between each layer and build up the colour with each layer you add by drying in between.

To add more texture to the background I have used the "Circulate" stencil from the Arty Farty collection and some of the gorgeous "Tangerine" Colour Paste.

 

I needed to add some black to the layout so incorporated some stamping on my background.  I love the "Floral Delights No. 2" Stamp Set.  There are two different stamp sets with flowers and are a great staple set to have in your collection. 

After stamping two different size flowers, I then coloured the centre with some of the "Sunshine" watercolours.

The part of prep was to colour my chosen title in black.  I did this again with my watercolour palette in "Soot". If you don't have any of the Colour Blast watercolours, you can get the same affect either using Embossing Powders, Shimmer Dust or Mica Powder. 

 As I now print my photos at home I tend to print them with borders so that I don't have to mat them on cardstock.  I added some 3D foam tape to the reverse of the photo before gluing to my page.

I added the heart and a couple of matching flowers from my stash to the bottom left of the photo, glued down the title (3D foam dots added to back) overlapping the photo a little and then finished by adding a little of the black hessian ribbon at the top and bottom.

Below are a couple of closeups of the finished layout.

Thanks so much for stopping by.

I hope you are all staying safe during this unprecedented time and enjoy crafting to keep busy.

Don't forget we have a monthly challenge happening over a the 

Colour Blast Creative Hive Facebook Page

Until next time.... happy creating.

Anita E 

xx

Beauty | Colour Blast by Bee Arty

Welcome back Crafters.

For my post today I wanted to use one of the gorgeous rice papers in my personal stash, so I teamed it with some of my favourite colours from Colour Blast by Bee Arty. The final result ended up entirely different to what I what I was first imaging but I love the end result.

 To start I took my chosen size canvas which had already been prepped with Gesso and attached my rice paper lady along with wording from the paper to the canvas using a clear glue.

I decided straight off I wanted to use the Sienna Colour Paste and needed a colour to combine nicely with it.  One of my favourite colours from Colour Blast by Bee Arty is Deep Water but I didn't have any in my collection so thought I would mix up something similar from my Artist Inks.  I chose the colour of Mermaid and Oasis combining equal quantities with some Heavy White Gesso. 

I covered the majority of the canvas front (kept away from the lady and also went around the edges (sorry forgot to take a photo).  The colour wasn't as intense as I wanted so I just mixed up the same Artist Ink colours together. This time I applied the colour directly to my project, no gesso used this time.  I dabbed it all over the canvas and as the first layer dried I then added more, going gently over my image.

 

Once dry I took the Sienna Colour Paste and the A6 stencil Rose Reveal from the Love and Grace collection and applied the Colour Paste around the edges of the canvas. I also took some of the Colour Paste on the edge of one of my fingers and smudged it in between the stenciling.

More interest needed to be added to the background.  I added some stamping using the script stamp from the Memories Stamp set using a matching ink pad from my collection.  

Next I added more texture using the Scripted Stencil and a mix of Heavy White Gesso and some of the Mermaid Shimmer Dust in a few random places. I then used the same stencil with some of the Mermaid and Oasis Artist Ink to add more details to the background.

 

The last couple of details I created before adding my embellishments was the colouring of my metal with some of the Deep Water Embossing Powder.  I heated up the metal embellishment with a heat gun and then sprinkled the powder over it.  Shake off the excess then set with the heat gun.

And lastly, using a combination of Colour Sprays and Colour Shimmer Sprays colour up some cotton gauze to match the colours of the canvas. I used Colour Sprays in Lagoon and Coffee and Shimmer Spray in Sienna .

I added a few strands of colours pearls along the top and bottom of the canvas and also coloured up a chipboard title with a matching ink.

I glued metal at the waist of the girl and added some matching flowers, tucking in some of the coloured gauze underneath.  Finally I added flowers to her hair and added the gauze also.

Check out the couple of closeups of the canvas.

 

Thanks for stopping by.  I hope you get some craft therapy some time this week.

Take care for now.

Anita E

"My Heart Belong to You" Card & Gift Box | Colour Blast by Bee Arty

Hi Everyone

I wanted to share my first blog post for the new Colour Blast by Bee Arty.
For today's share I wanted to create something a little different.

I love the Vampyre Rose paper collection and after creating several other projects I had bits and pieces from my 12x12" papers left that I really didn't want to just throw away so I decided to create a box and then I matched it up with a gorgeous card.

A perfect combination for the someone you love.

 

I received an online purchase in the mail the other day and it arrived in a little kraft box.  I nearly threw it in the recycle bin but thought.... hey what a gorgeous gift box it I bling it up.

To start I painted the box with the Heavy Black Gesso both inside and out.

 

Using the stunning Darkness patterned paper, cut out pieces to cover all outside pieces of the box.

Next I die cut four of the edge die from the Desire metal die set in a red cardstock. Working from the centre of each side of the box and the centre of the die cuts trim down the die cut pieces and adhere using glue to the four sides of the box.

Next I blinged up the box with some red bling from my stash around the top of the box and along the top edge of the four sides at the top of the die cut images.

 

 Taking the Gargoyle patterned paper, colour in the four flower images using some matching green and red.  I used some of the Grass Artist Ink and Love Colour Spray with an aquabrush to colour the images. After they are dry..... fussy cut them out.

Two of these fussy cut and coloured flowers were used on the top of the box along with a couple of leaves and flowers from my stash to finish the box.

 

I then decided to make a matching card to go with the box.

To start I decided on making a 5x7" card. I used a white card base and covered the font with a piece of red cardstock of the same size.

Next, I cut our a piece of black cardstock 1/4" smaller than the card.

Using the Fire Engine Colour Paste and the gorgeous Devotion stencil create the card background. Once dry attach over the red cardstock on the card base.

Next chose a couple of patterned strips from the Gargoyle patterned paper.  I also cut out two more of the Desire die in matching red cardstock.

 

Attach the two cut die pieces to the reverse of the pinkish patterned paper.  Add 3D foam tape to the reverse of the strip before adhering in the centre of the white patterned paper strip. Add some more 3D foam tape to the reverse of the white patterned paper before adhering to the card base.

**Make sure you add some glue to the foam tape before attaching to the card as the foam tape will not attach permanently to mixed media and the glue will ensure it strip stays in place.

I chose the wording from a tag for my card.  I deconstructed the wording and mounted them on 3D foam dots.  Keep the heart and scroll for another project.

To finish your card use the remaining two coloured in flowers that you created, a couple of flowers and other items from your crafting stash to finish. I was lucky enough to have a gorgeous Charms Creations heart in my stash so added that too.  

Check out some closeups of the finished projects.

Thanks so much for stopping by.

Happy creating.

Anita E